OMSE can design camera poles, at the shapes of polygon, round section and pipe. Camera poles of which cameras are mounted for security or other purposes are produced as lattice, polygonal or circular type and delivered as galvanized and / or painted. Polygonal conical lighting poles which are used for the illumination of highways, streets, parking lots, squares, gas stations, housing estates, etc. are produced from 3m upto 15m at height. Poles up to 12m are produced as a single piece. Columns that are greater than 12m are formed by slip-joint method of two polygonal modules.

The poles have base flange plates for the anchorage base mounting. The luminaire cross arms (brackets) can be designed and produced at the desired length and quantity. Round conical poles are produced as an aesthetical alternative to standard polygonal cross section ones. The poles are manufactured up to 12m height. The conicity can be 1 % or 1,34 % alternatively. The round conical poles can have 1-2-3 or 4 straight luminaire cross arms. On the other hand, pedestrian brackets or decorative brackets can be applied if desired by the customer. The camera poles are produced at standard polygonal or decorative type. The most important issue in these poles is to get to clear image at the requested height the general features of the pole and the peak displacement calculation at the operational wind speeds are meticulously designed by our engineers according to the number and technical specifications of cameras. The camera poles, which are manufactured as galvanized or electrostatic powder painted after galvanization, have a long service life.